The Renovator Advantage
2 rows of discs plus a roller results in a 3-stage operation to achieve more in fewer passes.
Stage 1 – Front Discs
3 discs either side of each wheel track cut and move bulged soil into the hollow of the wheel track.
![rr-stage1-retina rr-stage1-retina](https://www.ozagmachinery.com.au/wp-content/uploads/2023/07/rr-stage1-retina.png)
Stage 2 – Rear Discs
The rear discs level the soil and throw outwards to prevent large humps in between tracks.
![rr-stage2 rr-stage2](https://www.ozagmachinery.com.au/wp-content/uploads/2023/07/rr-stage2.png)
Stage 3 – Roller
Sets depths and packs down wheel track for an even finish. Helps to break down clods and provide a good even surface for tractors and boomsprays to drive over.
![rr-stage3 rr-stage3](https://www.ozagmachinery.com.au/wp-content/uploads/2023/07/rr-stage3.png)
![rr-tractor-top-down rr-tractor-top-down](https://www.ozagmachinery.com.au/wp-content/uploads/2023/07/rr-tractor-top-down.png)
![rr-side-view rr-side-view](https://www.ozagmachinery.com.au/wp-content/uploads/2023/07/rr-side-view.png)
Allows the machine to work without interference from the tractor. Drawbar helps to isolate tractor and machine so that the paddock doesn’t become wavy and tracks are repaired consistently.
Drawbar pull with rear roller allows the machine to follow the paddock level regardless of how bad the wheel tracks are. Depth is independent of tractor ride, a huge advantage over any linkage mount machines currently on the market which gives a more consistent depth over a longer period.
Frequently Asked Questions
We understand the importance and urgency required when farming and ensure our parts are ready when you need them. We stock a huge array of parts that are ready to deliver at our Sales and Service centres around Australia. We can even manufacture specialist parts in our dedicated fabrication plant if required. Basically, we’ll do everything possible to ensure we keep you going!
Features
SKF AGRI HUB maintenance-FREE BEARINGS
Less maintenance, so you can plough on.
All ILGI Aragon tillage equipment now features SKF® Agri Hub Maintenance-Free Bearings.
Agri Hub is a fully integrated bearing and sealing system that provides sealing against straw, mud, fertiliser and dust. Sealed for life, these hubs reduce downtime and maintenance costs thanks to their robust design and ongoing reliability.
ROLLER RUBBER SUSPENSION SYSTEM
Fitted on 4m models and above. The rubber suspension system acts to reduce forces acting through the frame especially in paddocks with rocks but still allows for good ground pressure to ensure that clods are broken down and a good seed bed prepared.
HYDRAULIC ADJUSTMENT & STOPS
All models feature a hydraulic ram fitted with a number of stops. This makes initial setup for your depth simple and consistent. Take the guess work out by adjusting your depth on the run and then once you reach your desired depth place stops in and have the knowledge that your depth will be consistent across your entire paddock.
5mm Thick Discs
Tough 510mm x 5mm thick discs are standard, with replacement discs available via Oz Ag Spare Parts.
HYDRAULIC REAR ROLLER
This makes initial setup for your depth easy and simple. Allowing you to reach your desired depth more consistently.
HIGH QUALITY FINISH
Tested and designed for Australian conditions, the Rapid Renovator leaves an even finish, in the hardest of conditions.
REAR ROLLER OPTIONS
“The finishing difference”
Two types of Rollers are offered for the ILGI Aragon Disc Tillers.
Cage Roller (Standard) – Lighter and easier to handle, better performance in wet conditions and loamy sandy soils, this works by not only crushing clods with the pipes but also breaking clods thrown into and around the cage when working at speed.
Disc Roller (Option) – Heavier and better in hard to break down clay conditions or where a finer finish is required, the flanges on the disc roller help by reducing surface area that comes in contact with the clods and therefore increase the pressure providing a smooth and fine tilth.
SPECIFICATIONS
![](https://www.ozagmachinery.com.au/wp-content/uploads/2020/10/ilgi-logo-1.png)
BRAND
ILGI
ROLLER TYPE
Cage Roller
TYPE
Folding
NUMBER OF DISCS
28
DISC DIAMETER
510 mm
DISC THICKNESS
5 mm
WORKING WIDTH
5 m
TRANSPORT WIDTH
2.8 m
WEIGHT
3400 kg
POWER
130+ hp
TYRES
400/60-15.5
![SKF-Logo-400px-RGB SKF-Logo-400px-RGB](https://www.ozagmachinery.com.au/wp-content/uploads/2020/11/SKF-Logo-400px-RGB.png)
SKF AGRI HUB
Less maintenance, so you can plough on.
All ILGI Aragon tillage equipment now features SKF® Agri Hub Maintenance-Free Bearings
Agri Hub is a fully integrated bearing and sealing system that provides sealing against straw, mud, fertilizer and dust. Sealed for life, these hubs reduce downtime and maintenance costs thanks to their robust design and ongoing reliability.
SKF Agri Hub is a robust unit for independent tillage discs that has been specifically developed to meet the demands from the agriculture industry for increase productivity reduced costs and care for the environment.